Well here's your USB port does not appear, try radar Turn It On, to see what happens when the Cuple SSECONDS If nothing happens, try a different USB port on the back of this on the PC. WHY XP automatically detects new devices. Try the drivers from the CD that came with the camera YOR ... If your house is the card or xD memory card and that is when your PC CARD READER works without PHISICALL Connect ... But be sure kind of card and reader IS YOR PC ... ALSO IN XP Start menu to All Programs, Accessories Scanner and Camera Wizard, read by accident thats CHECK LABORATORY periphery Si Bon ...
Please check the following 1 check), if the USB driver is installed correctly ... r ur, go to Device Manager. U can check the status of USB there. If not, then again 2) If the USB or ur digi cam in Ur PC did not recognize the camera when the camera is on ... Make sure that U. 3) Ensure that the USB cable is connected to the side of the camera ... I myself have the opposite side of the camera is connected ... Forced or damaged ..
Right click on the My Computer icon, select Properties, click the Hardware tab and click Device Manager. In the Action menu, click Scan for hardware changes. It should scan your system for all new or modified equipment, and ask you to install the driver (s), if not built into WinXP to.
4 comments:
Well here's your USB port does not appear, try radar Turn It On, to see what happens when the Cuple SSECONDS If nothing happens, try a different USB port on the back of this on the PC. WHY XP automatically detects new devices. Try the drivers from the CD that came with the camera YOR ... If your house is the card or xD memory card and that is when your PC CARD READER works without PHISICALL Connect ... But be sure kind of card and reader IS YOR PC ... ALSO IN XP Start menu to All Programs, Accessories Scanner and Camera Wizard, read by accident thats CHECK LABORATORY periphery Si Bon ...
Please check the following
1 check), if the USB driver is installed correctly ... r ur, go to Device Manager. U can check the status of USB there. If not, then again
2) If the USB or ur digi cam in Ur PC did not recognize the camera when the camera is on ... Make sure that U.
3) Ensure that the USB cable is connected to the side of the camera ... I myself have the opposite side of the camera is connected ... Forced or damaged ..
Right click on the My Computer icon, select Properties, click the Hardware tab and click Device Manager. In the Action menu, click Scan for hardware changes. It should scan your system for all new or modified equipment, and ask you to install the driver (s), if not built into WinXP to.
Plug and Play needs to be enabled.
Break the manual, you may need to install some drivers for the camera.
Have you tried a different USB port? The cables are tight? Turn on the camera?
Post a Comment